Cat Window Perch Suction Cups Not Sticking? Check the Maker’s Instructions
If suction cups on your cat’s window perch are not staying attached, take the perch out of use while you check the instructions for its exact model. For the K&H EZ Mount Window Kitty Sill Single Level, follow the maker’s care and instruction manual. Other makers may specify different steps.
K&H’s manual calls for cleaning and drying the glass with glass cleaner, and cleaning each cup. It also says to level the platform, press out air, and keep similar tension on the support straps. For the Push ’n’ Turn cups, loosen the knob counterclockwise, press the cup against the glass to remove air, then turn the knob clockwise until tight.
K&H recommends removing the cups at least once a month to clean the window area and cups, then reinstalling them. The manual cautions that debris, temperature changes, sunshine, and excessive use can weaken holding power.
| What you find | Next step |
|---|---|
| The glass or cups need cleaning | Follow K&H’s clean-and-dry steps before reinstalling. |
| The mount needs resetting | Check the level, air, strap tension, and Push ’n’ Turn steps in the manual. |
| The perch still will not stay attached | Keep it out of use and contact K&H. |
Research notes
Sources behind this guide
Written and source-checked by Puni Pet Guides Editorial Team · Reviewed Nov 15, 2026
This guide synthesizes the public references below; it does not report hands-on product testing or independent veterinary review.
Review scope: practical context, source traceability, and clear non-diagnostic boundaries. Diagnosis and treatment decisions stay with veterinarians.